atarted new rf433rcv as copy of pjrc rawhid

[svn42.git] / rf433rcv / teensy / usb_rawhid.h

diff --git a/rf433rcv/teensy/usb_rawhid.h b/rf433rcv/teensy/usb_rawhid.h
new file mode 100644 (file)
index 0000000..65bc4de
--- /dev/null
+++ b/rf433rcv/teensy/usb_rawhid.h
@@ -0,0 +1,85 @@
+#ifndef usb_serial_h__
+#define usb_serial_h__
+
+#include <stdint.h>
+
+void usb_init(void);                   // initialize everything
+uint8_t usb_configured(void);          // is the USB port configured
+int8_t usb_rawhid_recv(uint8_t *buffer, uint8_t timeout);  // receive a packet, with timeout
+int8_t usb_rawhid_send(const uint8_t *buffer, uint8_t timeout); // send a packet, with timeout
+
+// This file does not include the HID debug functions, so these empty
+// macros replace them with nothing, so users can compile code that
+// has calls to these functions.
+#define usb_debug_putchar(c)
+#define usb_debug_flush_output()
+
+
+// Everything below this point is only intended for usb_serial.c
+#ifdef USB_PRIVATE_INCLUDE
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#define EP_TYPE_CONTROL                        0x00
+#define EP_TYPE_BULK_IN                        0x81
+#define EP_TYPE_BULK_OUT               0x80
+#define EP_TYPE_INTERRUPT_IN           0xC1
+#define EP_TYPE_INTERRUPT_OUT          0xC0
+#define EP_TYPE_ISOCHRONOUS_IN         0x41
+#define EP_TYPE_ISOCHRONOUS_OUT                0x40
+
+#define EP_SINGLE_BUFFER               0x02
+#define EP_DOUBLE_BUFFER               0x06
+
+#define EP_SIZE(s)     ((s) > 32 ? 0x30 :      \
+                       ((s) > 16 ? 0x20 :      \
+                       ((s) > 8  ? 0x10 :      \
+                                   0x00)))
+
+#define MAX_ENDPOINT           4
+
+#define LSB(n) (n & 255)
+#define MSB(n) ((n >> 8) & 255)
+
+#if defined(__AVR_AT90USB162__)
+#define HW_CONFIG() 
+#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
+#define USB_CONFIG() (USBCON = (1<<USBE))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_ATmega32U4__)
+#define HW_CONFIG() (UHWCON = 0x01)
+#define PLL_CONFIG() (PLLCSR = 0x12)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB646__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x1A)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB1286__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x16)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#endif
+
+// standard control endpoint request types
+#define GET_STATUS                     0
+#define CLEAR_FEATURE                  1
+#define SET_FEATURE                    3
+#define SET_ADDRESS                    5
+#define GET_DESCRIPTOR                 6
+#define GET_CONFIGURATION              8
+#define SET_CONFIGURATION              9
+#define GET_INTERFACE                  10
+#define SET_INTERFACE                  11
+// HID (human interface device)
+#define HID_GET_REPORT                 1
+#define HID_GET_IDLE                   2
+#define HID_GET_PROTOCOL               3
+#define HID_SET_REPORT                 9
+#define HID_SET_IDLE                   10
+#define HID_SET_PROTOCOL               11
+#endif
+#endif