X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=rf433rcv%2Fteensy%2Fusb_rawhid.h;fp=rf433rcv%2Fteensy%2Fusb_rawhid.h;h=65bc4de7af1fe0a0b914fa034775b390b3cfa3fd;hp=0000000000000000000000000000000000000000;hb=deb2b278d460a716e0e2d8be370b1ee8f8963e34;hpb=1c4aea8ca6197b857498de2881b8bc594af1df49

diff --git a/rf433rcv/teensy/usb_rawhid.h b/rf433rcv/teensy/usb_rawhid.h
new file mode 100644
index 0000000..65bc4de
--- /dev/null
+++ b/rf433rcv/teensy/usb_rawhid.h
@@ -0,0 +1,85 @@
+#ifndef usb_serial_h__
+#define usb_serial_h__
+
+#include <stdint.h>
+
+void usb_init(void);			// initialize everything
+uint8_t usb_configured(void);		// is the USB port configured
+int8_t usb_rawhid_recv(uint8_t *buffer, uint8_t timeout);  // receive a packet, with timeout
+int8_t usb_rawhid_send(const uint8_t *buffer, uint8_t timeout); // send a packet, with timeout
+
+// This file does not include the HID debug functions, so these empty
+// macros replace them with nothing, so users can compile code that
+// has calls to these functions.
+#define usb_debug_putchar(c)
+#define usb_debug_flush_output()
+
+
+// Everything below this point is only intended for usb_serial.c
+#ifdef USB_PRIVATE_INCLUDE
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#define EP_TYPE_CONTROL			0x00
+#define EP_TYPE_BULK_IN			0x81
+#define EP_TYPE_BULK_OUT		0x80
+#define EP_TYPE_INTERRUPT_IN		0xC1
+#define EP_TYPE_INTERRUPT_OUT		0xC0
+#define EP_TYPE_ISOCHRONOUS_IN		0x41
+#define EP_TYPE_ISOCHRONOUS_OUT		0x40
+
+#define EP_SINGLE_BUFFER		0x02
+#define EP_DOUBLE_BUFFER		0x06
+
+#define EP_SIZE(s)	((s) > 32 ? 0x30 :	\
+			((s) > 16 ? 0x20 :	\
+			((s) > 8  ? 0x10 :	\
+			            0x00)))
+
+#define MAX_ENDPOINT		4
+
+#define LSB(n) (n & 255)
+#define MSB(n) ((n >> 8) & 255)
+
+#if defined(__AVR_AT90USB162__)
+#define HW_CONFIG() 
+#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
+#define USB_CONFIG() (USBCON = (1<<USBE))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_ATmega32U4__)
+#define HW_CONFIG() (UHWCON = 0x01)
+#define PLL_CONFIG() (PLLCSR = 0x12)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB646__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x1A)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB1286__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x16)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#endif
+
+// standard control endpoint request types
+#define GET_STATUS			0
+#define CLEAR_FEATURE			1
+#define SET_FEATURE			3
+#define SET_ADDRESS			5
+#define GET_DESCRIPTOR			6
+#define GET_CONFIGURATION		8
+#define SET_CONFIGURATION		9
+#define GET_INTERFACE			10
+#define SET_INTERFACE			11
+// HID (human interface device)
+#define HID_GET_REPORT			1
+#define HID_GET_IDLE			2
+#define HID_GET_PROTOCOL		3
+#define HID_SET_REPORT			9
+#define HID_SET_IDLE			10
+#define HID_SET_PROTOCOL		11
+#endif
+#endif