IR Sensor, PanicButton, OneWireTempSensor
[svn42.git] / rf433ctl / DallasTemperature / README
diff --git a/rf433ctl/DallasTemperature/README b/rf433ctl/DallasTemperature/README
new file mode 100644 (file)
index 0000000..829d266
--- /dev/null
@@ -0,0 +1,51 @@
+Arduino Library for Dallas Temperature ICs
+==========================================
+
+Usage
+-----
+
+This library supports the following devices:
+    DS18B20
+    DS18S20 - Please note there appears to be an issue with this series.
+    DS1822
+
+You will need a pull-up resistor of about 5 KOhm between the 1-Wire data line
+and your 5V power. If you are using the DS18B20, ground pins 1 and 3. The
+centre pin is the data line '1-wire'.
+
+We have included a "REQUIRESNEW" and "REQUIRESALARMS" definition. If you 
+want to slim down the code feel free to use either of these by including
+#define REQUIRESNEW or #define REQUIRESALARMS a the top of DallasTemperature.h
+
+Credits
+-------
+
+The OneWire code has been derived from
+http://www.arduino.cc/playground/Learning/OneWire.
+Miles Burton <miles@mnetcs.com> originally developed this library.
+Tim Newsome <nuisance@casualhacker.net> added support for multiple sensors on
+the same bus.
+Guil Barros [gfbarros@bappos.com] added getTempByAddress (v3.5)
+
+Website
+-------
+
+You can find the latest version of the library at
+http://milesburton.com/index.php?title=Dallas_Temperature_Control_Library
+
+License
+-------
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA