IRRemote fuer Yamaha Reciever

[svn42.git] / rf433ctl / IRremote / examples / IRrelay / IRrelay.pde

diff --git a/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde b/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde
new file mode 100644 (file)
index 0000000..f333133
--- /dev/null
+++ b/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde
@@ -0,0 +1,85 @@
+/*
+ * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+int RECV_PIN = 11;
+int RELAY_PIN = 4;
+
+IRrecv irrecv(RECV_PIN);
+decode_results results;
+
+// Dumps out the decode_results structure.
+// Call this after IRrecv::decode()
+// void * to work around compiler issue
+//void dump(void *v) {
+//  decode_results *results = (decode_results *)v
+void dump(decode_results *results) {
+  int count = results->rawlen;
+  if (results->decode_type == UNKNOWN) {
+    Serial.println("Could not decode message");
+  } 
+  else {
+    if (results->decode_type == NEC) {
+      Serial.print("Decoded NEC: ");
+    } 
+    else if (results->decode_type == SONY) {
+      Serial.print("Decoded SONY: ");
+    } 
+    else if (results->decode_type == RC5) {
+      Serial.print("Decoded RC5: ");
+    } 
+    else if (results->decode_type == RC6) {
+      Serial.print("Decoded RC6: ");
+    }
+    Serial.print(results->value, HEX);
+    Serial.print(" (");
+    Serial.print(results->bits, DEC);
+    Serial.println(" bits)");
+  }
+  Serial.print("Raw (");
+  Serial.print(count, DEC);
+  Serial.print("): ");
+
+  for (int i = 0; i < count; i++) {
+    if ((i % 2) == 1) {
+      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
+    } 
+    else {
+      Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    Serial.print(" ");
+  }
+  Serial.println("");
+}
+
+void setup()
+{
+  pinMode(RELAY_PIN, OUTPUT);
+  pinMode(13, OUTPUT);
+    Serial.begin(9600);
+  irrecv.enableIRIn(); // Start the receiver
+}
+
+int on = 0;
+unsigned long last = millis();
+
+void loop() {
+  if (irrecv.decode(&results)) {
+    // If it's been at least 1/4 second since the last
+    // IR received, toggle the relay
+    if (millis() - last > 250) {
+      on = !on;
+      digitalWrite(RELAY_PIN, on ? HIGH : LOW);
+      digitalWrite(13, on ? HIGH : LOW);
+      dump(&results);
+    }
+    last = millis();      
+    irrecv.resume(); // Receive the next value
+  }
+}\r