to github

[svn42.git] / rf433ctl / IRremote / examples / IRrelay / IRrelay.pde

diff --git a/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde b/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde
deleted file mode 100644 (file)
index f333133..0000000
--- a/rf433ctl/IRremote/examples/IRrelay/IRrelay.pde
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
- * An IR detector/demodulator must be connected to the input RECV_PIN.
- * Version 0.1 July, 2009
- * Copyright 2009 Ken Shirriff
- * http://arcfn.com
- */
-
-#include <IRremote.h>
-
-int RECV_PIN = 11;
-int RELAY_PIN = 4;
-
-IRrecv irrecv(RECV_PIN);
-decode_results results;
-
-// Dumps out the decode_results structure.
-// Call this after IRrecv::decode()
-// void * to work around compiler issue
-//void dump(void *v) {
-//  decode_results *results = (decode_results *)v
-void dump(decode_results *results) {
-  int count = results->rawlen;
-  if (results->decode_type == UNKNOWN) {
-    Serial.println("Could not decode message");
-  } 
-  else {
-    if (results->decode_type == NEC) {
-      Serial.print("Decoded NEC: ");
-    } 
-    else if (results->decode_type == SONY) {
-      Serial.print("Decoded SONY: ");
-    } 
-    else if (results->decode_type == RC5) {
-      Serial.print("Decoded RC5: ");
-    } 
-    else if (results->decode_type == RC6) {
-      Serial.print("Decoded RC6: ");
-    }
-    Serial.print(results->value, HEX);
-    Serial.print(" (");
-    Serial.print(results->bits, DEC);
-    Serial.println(" bits)");
-  }
-  Serial.print("Raw (");
-  Serial.print(count, DEC);
-  Serial.print("): ");
-
-  for (int i = 0; i < count; i++) {
-    if ((i % 2) == 1) {
-      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
-    } 
-    else {
-      Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
-    }
-    Serial.print(" ");
-  }
-  Serial.println("");
-}
-
-void setup()
-{
-  pinMode(RELAY_PIN, OUTPUT);
-  pinMode(13, OUTPUT);
-    Serial.begin(9600);
-  irrecv.enableIRIn(); // Start the receiver
-}
-
-int on = 0;
-unsigned long last = millis();
-
-void loop() {
-  if (irrecv.decode(&results)) {
-    // If it's been at least 1/4 second since the last
-    // IR received, toggle the relay
-    if (millis() - last > 250) {
-      on = !on;
-      digitalWrite(RELAY_PIN, on ? HIGH : LOW);
-      digitalWrite(13, on ? HIGH : LOW);
-      dump(&results);
-    }
-    last = millis();      
-    irrecv.resume(); // Receive the next value
-  }
-}\r