to github

[svn42.git] / rf433ctl / DallasTemperature / examples / Alarm / Alarm.pde

diff --git a/rf433ctl/DallasTemperature/examples/Alarm/Alarm.pde b/rf433ctl/DallasTemperature/examples/Alarm/Alarm.pde
deleted file mode 100644 (file)
index e0884ea..0000000
--- a/rf433ctl/DallasTemperature/examples/Alarm/Alarm.pde
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <OneWire.h>
-#include <DallasTemperature.h>
-
-// Data wire is plugged into port 2 on the Arduino
-#define ONE_WIRE_BUS 3
-
-// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
-OneWire oneWire(ONE_WIRE_BUS);
-
-// Pass our oneWire reference to Dallas Temperature. 
-DallasTemperature sensors(&oneWire);
-
-// arrays to hold device addresses
-DeviceAddress insideThermometer, outsideThermometer;
-
-void setup(void)
-{
-  // start serial port
-  Serial.begin(9600);
-  Serial.println("Dallas Temperature IC Control Library Demo");
-
-  // Start up the library
-  sensors.begin();
-  
-  // locate devices on the bus
-  Serial.print("Found ");
-  Serial.print(sensors.getDeviceCount(), DEC);
-  Serial.println(" devices.");
-
-  // search for devices on the bus and assign based on an index.
-  if (!sensors.getAddress(insideThermometer, 0)) Serial.println("Unable to find address for Device 0"); 
-  if (!sensors.getAddress(outsideThermometer, 1)) Serial.println("Unable to find address for Device 1"); 
-
-  // show the addresses we found on the bus
-  Serial.print("Device 0 Address: ");
-  printAddress(insideThermometer);
-  Serial.println();
-
-  Serial.print("Device 0 Alarms: ");
-  printAlarms(insideThermometer);
-  Serial.println();
-  
-  Serial.print("Device 1 Address: ");
-  printAddress(outsideThermometer);
-  Serial.println();
-
-  Serial.print("Device 1 Alarms: ");
-  printAlarms(outsideThermometer);
-  Serial.println();
-  
-  Serial.println("Setting alarm temps...");
-
-  // alarm when temp is higher than 30C
-  sensors.setHighAlarmTemp(insideThermometer, 30);
-  
-  // alarm when temp is lower than -10C
-  sensors.setLowAlarmTemp(insideThermometer, -10);
-  
-  // alarm when temp is higher than 31C
-  sensors.setHighAlarmTemp(outsideThermometer, 31);
-  
-  // alarn when temp is lower than 27C
-  sensors.setLowAlarmTemp(outsideThermometer, 27);
-  
-  Serial.print("New Device 0 Alarms: ");
-  printAlarms(insideThermometer);
-  Serial.println();
-  
-  Serial.print("New Device 1 Alarms: ");
-  printAlarms(outsideThermometer);
-  Serial.println();
-}
-
-// function to print a device address
-void printAddress(DeviceAddress deviceAddress)
-{
-  for (uint8_t i = 0; i < 8; i++)
-  {
-    if (deviceAddress[i] < 16) Serial.print("0");
-    Serial.print(deviceAddress[i], HEX);
-  }
-}
-
-// function to print the temperature for a device
-void printTemperature(DeviceAddress deviceAddress)
-{
-  float tempC = sensors.getTempC(deviceAddress);
-  Serial.print("Temp C: ");
-  Serial.print(tempC);
-  Serial.print(" Temp F: ");
-  Serial.print(DallasTemperature::toFahrenheit(tempC));
-}
-
-void printAlarms(uint8_t deviceAddress[])
-{
-  char temp;
-  temp = sensors.getHighAlarmTemp(deviceAddress);
-  Serial.print("High Alarm: ");
-  Serial.print(temp, DEC);
-  Serial.print("C/");
-  Serial.print(DallasTemperature::toFahrenheit(temp));
-  Serial.print("F | Low Alarm: ");
-  temp = sensors.getLowAlarmTemp(deviceAddress);
-  Serial.print(temp, DEC);
-  Serial.print("C/");
-  Serial.print(DallasTemperature::toFahrenheit(temp));
-  Serial.print("F");
-}
-
-// main function to print information about a device
-void printData(DeviceAddress deviceAddress)
-{
-  Serial.print("Device Address: ");
-  printAddress(deviceAddress);
-  Serial.print(" ");
-  printTemperature(deviceAddress);
-  Serial.println();
-}
-
-void checkAlarm(DeviceAddress deviceAddress)
-{
-  if (sensors.hasAlarm(deviceAddress))
-  {
-    Serial.print("ALARM: ");
-    printData(deviceAddress);
-  }
-}
-
-void loop(void)
-{ 
-  // call sensors.requestTemperatures() to issue a global temperature 
-  // request to all devices on the bus
-  Serial.print("Requesting temperatures...");
-  sensors.requestTemperatures();
-  Serial.println("DONE");
-
-  // Method 1:
-  // check each address individually for an alarm condition
-  checkAlarm(insideThermometer);
-  checkAlarm(outsideThermometer);
-/*
-  // Alternate method:
-  // Search the bus and iterate through addresses of devices with alarms
-  
-  // space for the alarm device's address
-  DeviceAddress alarmAddr;
-
-  Serial.println("Searching for alarms...");
-  
-  // resetAlarmSearch() must be called before calling alarmSearch()
-  sensors.resetAlarmSearch();
-  
-  // alarmSearch() returns 0 when there are no devices with alarms
-  while (sensors.alarmSearch(alarmAddr))
-  {
-    Serial.print("ALARM: ");
-    printData(alarmAddr);
-  }
-*/
-
-}
-\r