reprap improvements

[reprap_mendel_prusa.git] / teacup_firmware / config.h

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index c19a502..1c685a3 100644 (file)
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -129,7 +129,7 @@
 #define        X_MIN                   0.0
 // eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
 //#define      X_MAX                   184.0
-#define        X_MAX                   180.0
+#define        X_MAX                   177.0
 
 #define        Y_MIN                   0.0
 #define        Y_MAX                   195.0
@@ -280,7 +280,7 @@
        set temperature +- TEMP_HYSTERESIS) for this long before target is achieved
        (and a M116 succeeds). Unit is seconds.
 */
-#define        TEMP_RESIDENCY_TIME             60
+#define        TEMP_RESIDENCY_TIME             30
 
 /**
   TEMP_EWMA: Smooth noisy temperature sensors. Good hardware shouldn't be
@@ -326,7 +326,7 @@
 
 //                 name       type            pin        additional
 DEFINE_TEMP_SENSOR(noheater,  TT_INTERCOM,    AIO0,      0)
-DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
+//DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
 
 // bed has no heater attached
 #define HEATER_bed HEATER_noheater
@@ -394,7 +394,7 @@ DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
 
 // workaround for heated bed over intercom. HEATER_EXTRUDER, HEATER_BED are the intercom temp channel numbers.
 #define        HEATER_EXTRUDER 0
-#define HEATER_BED 1
+//~ #define HEATER_BED 1
 #define HEATER_FAN 2