X-Git-Url: https://git.realraum.at/?p=reprap_mendel_prusa.git;a=blobdiff_plain;f=teacup_firmware%2Fconfig.h;h=1c685a367b860915af6e17a068b8b623e2e7d83e;hp=c19a5021368863b1dfcfa14b90d5bd3b267a21bd;hb=4d9a26119df1308969a802bb6ed2ee84f35b7ffe;hpb=e44e0588ead1ab6341b959e7b24bef899b6bce5e

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index c19a502..1c685a3 100644
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -129,7 +129,7 @@
 #define	X_MIN			0.0
 // eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
 //#define	X_MAX			184.0
-#define	X_MAX			180.0
+#define	X_MAX			177.0
 
 #define	Y_MIN			0.0
 #define	Y_MAX			195.0
@@ -280,7 +280,7 @@
 	set temperature +- TEMP_HYSTERESIS) for this long before target is achieved
 	(and a M116 succeeds). Unit is seconds.
 */
-#define	TEMP_RESIDENCY_TIME		60
+#define	TEMP_RESIDENCY_TIME		30
 
 /**
   TEMP_EWMA: Smooth noisy temperature sensors. Good hardware shouldn't be
@@ -326,7 +326,7 @@
 
 //                 name       type            pin        additional
 DEFINE_TEMP_SENSOR(noheater,  TT_INTERCOM,    AIO0,      0)
-DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
+//DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
 
 // bed has no heater attached
 #define HEATER_bed HEATER_noheater
@@ -394,7 +394,7 @@ DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
 
 // workaround for heated bed over intercom. HEATER_EXTRUDER, HEATER_BED are the intercom temp channel numbers.
 #define	HEATER_EXTRUDER 0
-#define HEATER_BED 1
+//~ #define HEATER_BED 1
 #define HEATER_FAN 2