#include <avr/interrupt.h>
#include <util/delay.h>
#include "usb_rawhid.h"
-#include "analog.h"
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+#define RF_SEND_BUFFER_LEN_MAX 502
-volatile uint8_t do_output=0;
-uint8_t buffer[64];
+union multiint {
+ uint16_t u16;
+ uint8_t u8[2];
+} __attribute__((packed));
-int main(void)
-{
- int8_t r;
- uint8_t i;
- uint16_t val, count=0;
-
- // set for 16 MHz clock
- CPU_PRESCALE(0);
+volatile uint16_t output_count=0;
+volatile uint8_t active_buffer=0;
+volatile uint16_t send_buffer=0;
+volatile uint8_t capture=0;
+volatile uint16_t rf_send_buf_pos=0; //count of bits in rf_send_buffer that should be sent
+volatile union multiint rf_send_buf_len; //count of bits in rf_send_buffer that should be sent
+volatile uint8_t rf_send_count=0; // number of repetitions (times rf_send gets reloaded;
+uint8_t read_buffer[64]; // buffer for reading usb signals
+uint8_t write_buffer[2][64]; // buffer for writing usb signals
+uint8_t rf_send_buffer[RF_SEND_BUFFER_LEN_MAX]; // buffer for sending rf433 signals
+uint16_t rf_send_buf_offset=0;
- // Initialize the USB, and then wait for the host to set configuration.
- // If the Teensy is powered without a PC connected to the USB port,
- // this will wait forever.
- usb_init();
- while (!usb_configured()) /* wait */ ;
- // Wait an extra second for the PC's operating system to load drivers
- // and do whatever it does to actually be ready for input
- _delay_ms(1000);
+void reset()
+{
+ cli();
+ // disable watchdog, if enabled
+ // disable all peripherals
+ UDCON = 1;
+ USBCON = (1<<FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5);
+ #if defined(__AVR_AT90USB162__) // Teensy 1.0
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
+ TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
+ DDRB = 0; DDRC = 0; DDRD = 0;
+ PORTB = 0; PORTC = 0; PORTD = 0;
+ asm volatile("jmp 0x3E00");
+ #elif defined(__AVR_ATmega32U4__) // Teensy 2.0
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
+ DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
+ PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+ asm volatile("jmp 0x7E00");
+ #elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+ DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+ PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+ asm volatile("jmp 0xFC00");
+ #elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+ DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+ PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+ asm volatile("jmp 0x1FC00");
+ #endif
+}
- // Configure timer 0 to generate a timer overflow interrupt every
- // 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
- TCCR0A = 0x00;
- TCCR0B = 0x05;
- TIMSK0 = (1<<TOIE0);
+int main(void)
+{
+ // set for 16 MHz clock
+ CPU_PRESCALE(0);
+ DDRF|=3;
+ PORTF&=~1;
+ // Configure timer 0 to generate a timer overflow interrupt every
+ // 100*8 clock cycles, 50us
+ TCCR0A = 1<<WGM01;
+ TCCR0B = 1<<CS01;
+ OCR0A = 99;
+ TCNT0 = 0;
+ TIMSK0 = (1<<OCIE0A);
- while (1) {
- // if received data, do something with it
- r = usb_rawhid_recv(buffer, 0);
- if (r > 0) {
- // output 4 bits to D0, D1, D2, D3 pins
- DDRD = 0x0F;
- PORTD = (PORTD & 0xF0) | (buffer[0] & 0x0F);
- // ignore the other 63.5 bytes....
- }
- // if time to send output, transmit something interesting
- if (do_output) {
- do_output = 0;
- // send a packet, first 2 bytes 0xABCD
- buffer[0] = 0xAB;
- buffer[1] = 0xCD;
- // put A/D measurements into next 24 bytes
- for (i=0; i<12; i++) {
- val = analogRead(i);
- buffer[i * 2 + 2] = val >> 8;
- buffer[i * 2 + 3] = val & 255;
- }
- // most of the packet filled with zero
- for (i=26; i<62; i++) {
- buffer[i] = 0;
- }
- // put a count in the last 2 bytes
- buffer[62] = count >> 8;
- buffer[63] = count & 255;
- // send the packet
- usb_rawhid_send(buffer, 50);
- count++;
- }
- }
+ // Initialize the USB, and then wait for the host to set configuration.
+ // If the Teensy is powered without a PC connected to the USB port,
+ // this will wait forever.
+ usb_init();
+ while (!usb_configured()) /* wait */ ;
+ // Wait an extra second for the PC's operating system to load drivers
+ // and do whatever it does to actually be ready for input
+ _delay_ms(1000);
+ while (1) {
+ // if received data, do something with it
+ int8_t r = usb_rawhid_recv(read_buffer, 0);
+ if (r>0)
+ {
+ if (read_buffer[0]=='r') //reset
+ reset();
+ else if (read_buffer[0]=='b') //begin capture
+ capture=1;
+ else if (read_buffer[0]=='e') //end capture
+ capture=0;
+ else if (read_buffer[0]=='f') //fill send buffer
+ {
+ int8_t buffer_pos = 1;
+ if(!rf_send_buf_offset) {
+ rf_send_buf_len.u8[1]=read_buffer[1];
+ rf_send_buf_len.u8[0]=read_buffer[2];
+ buffer_pos+=2;
+ }
+ while(buffer_pos < r && rf_send_buf_offset<RF_SEND_BUFFER_LEN_MAX)
+ {
+ rf_send_buffer[rf_send_buf_offset]=read_buffer[buffer_pos];
+ rf_send_buf_offset++;
+ buffer_pos++;
+ }
+ }
+ else if (read_buffer[0]=='c') // clear send buffer
+ {
+ rf_send_buf_offset=0;
+ }
+ else if (read_buffer[0]=='s') //send
+ {
+ //write_buffer[0][0]=rf_send_buf_len.u8[1];
+ //write_buffer[0][1]=rf_send_buf_len.u8[0];
+ //usb_rawhid_send(write_buffer, 23);
+ capture=0;
+ rf_send_buf_pos=0;
+ rf_send_count=read_buffer[1]+1;
+ }
+ }
+ if (send_buffer)
+ {
+ send_buffer=0;
+ usb_rawhid_send(write_buffer[active_buffer?0:1], 23);
+ }
+ }
}
// This interrupt routine is run approx 61 times per second.
-ISR(TIMER0_OVF_vect)
+ISR(TIMER0_COMPA_vect)
{
- static uint8_t count=0;
-
- // set the do_output variable every 2 seconds
- if (++count > 122) {
- count = 0;
- do_output = 1;
- }
+ PORTF^=2;
+ if (rf_send_count && rf_send_buf_pos<rf_send_buf_len.u16)
+ {
+ if ( rf_send_buffer[rf_send_buf_pos/8] & (1<< (rf_send_buf_pos%8)))
+ {
+ PORTF|=1;
+ } else {
+ PORTF&=~1;
+ }
+ //rf_send_buffer[rf_send/8]>>=1;
+ rf_send_buf_pos++;
+ } else if (rf_send_count) {
+ rf_send_buf_pos=0;
+ rf_send_count--;
+ } else {
+ PORTF&=~1;
+ if (capture) {
+ write_buffer[active_buffer][output_count/8]<<=1;
+ write_buffer[active_buffer][output_count++/8]|=PIND&1;
+ if (output_count>=64*8)
+ {
+ output_count=0;
+ active_buffer=active_buffer?0:1;
+ send_buffer=1;
+ }
+ }
+ }
}
-
-
-