Elliminate superflous messages

[svn42.git] / rf433ctl / rf433ctl.pde

diff --git a/rf433ctl/rf433ctl.pde b/rf433ctl/rf433ctl.pde
index 9878159..f283c5f 100644 (file)
--- a/rf433ctl/rf433ctl.pde
+++ b/rf433ctl/rf433ctl.pde
@@ -11,6 +11,7 @@
 #define ONE_WIRE_PIN 8
 #define PANIC_BUTTON_PIN 7
 #define BLUELED_PWM_PIN 6
+#define BLUELED2_PWM_PIN 11
 #define PHOTO_ANALOGPIN 0
 //movement is reported if during IR_SAMPLE_DURATION at least IR_TRESHOLD ir signals are detectd
 #define IR_SAMPLE_DURATION 15000
@@ -204,7 +205,7 @@ void printTemperature(DeviceAddress deviceAddress)
 {
   dallas_sensors.requestTemperatures();
   float tempC = dallas_sensors.getTempC(deviceAddress);
-  Serial.print("Temp C: ");
+  //Serial.print("Temp C: ");
   Serial.println(tempC TEMPC_OFFSET_ARDUINO_GENEREATED_HEAT);
   //Serial.print(" Temp F: ");
   //Serial.println(DallasTemperature::toFahrenheit(tempC)); // Converts tempC to Fahrenheit
@@ -235,7 +236,7 @@ void updateLightLevel(unsigned int pin)
 
 void printLightLevel()
 {
-  Serial.print("Photo: ");
+  //Serial.print("Photo: ");
   Serial.println(light_level_mean_);
 }
 
@@ -262,7 +263,7 @@ bool wait_millis(unsigned long ms)
 }
 
 unsigned int flash_led_time_=0;
-unsigned int flash_led_brightness_=256;
+unsigned int flash_led_brightness_=255;
 unsigned int flash_led_delay_=8;
 void calculate_led_level(unsigned int pwm_pin)
 {
@@ -272,12 +273,20 @@ void calculate_led_level(unsigned int pwm_pin)
     return;
   flash_led_time_--;
   int c = abs(sin(float(flash_led_time_) / 100.0)) * flash_led_brightness_;
-  analogWrite(pwm_pin,c);
+  //int d = abs(sin(float(flash_led_time_) / 100.0)) * flash_led_brightness_;
+  analogWrite(BLUELED2_PWM_PIN, 255-c);
+  if (flash_led_brightness_ == 255)
+  {
+    if (flash_led_time_)
+      analogWrite(BLUELED_PWM_PIN, 255-c);
+    else
+      analogWrite(BLUELED_PWM_PIN, c);
+  }
 }
 
 void flash_led(unsigned int times, unsigned int brightness_divisor, unsigned int delay_divisor)
 {
-  unsigned int new_flash_led_brightness = 256 / brightness_divisor;
+  unsigned int new_flash_led_brightness = 255 / brightness_divisor;
   unsigned int new_flash_led_delay = 8 / delay_divisor;
   if (flash_led_time_ == 0 || new_flash_led_brightness > flash_led_brightness_)
     flash_led_brightness_=new_flash_led_brightness;
@@ -297,6 +306,7 @@ void setup()
   pinMode(PANIC_BUTTON_PIN, INPUT);      // set pin to input
   digitalWrite(PANIC_BUTTON_PIN, HIGH);  // turn on pullup resistors 
   analogWrite(BLUELED_PWM_PIN,0);
+  analogWrite(BLUELED2_PWM_PIN,255); //pwm sink(-) instead of pwm + (better for mosfets)
 
   Serial.begin(9600);