projects
/
svn42.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
reprap config file update, bootloader für motherboard
[svn42.git]
/
reprap_mendel_prusa
/
teacup_firmware
/
config.h
diff --git
a/reprap_mendel_prusa/teacup_firmware/config.h
b/reprap_mendel_prusa/teacup_firmware/config.h
index
6fbaa3c
..
4f015d9
100644
(file)
--- a/
reprap_mendel_prusa/teacup_firmware/config.h
+++ b/
reprap_mendel_prusa/teacup_firmware/config.h
@@
-64,7
+64,8
@@
*/
//#define STEPS_PER_M_X 10047
//#define STEPS_PER_M_X 8000
*/
//#define STEPS_PER_M_X 10047
//#define STEPS_PER_M_X 8000
-#define STEPS_PER_M_X 6766
+//rechnerisch 8000, experimentell auf der X-Achse 7684.8395
+#define STEPS_PER_M_X 7685
// 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
//#define STEPS_PER_M_Y 10047
//#define STEPS_PER_M_Y 8000
// 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
//#define STEPS_PER_M_Y 10047
//#define STEPS_PER_M_Y 8000
@@
-127,7
+128,9
@@
*/
#define X_MIN 0.0
*/
#define X_MIN 0.0
-#define X_MAX 184.0
+// eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
+//#define X_MAX 184.0
+#define X_MAX 180.0
#define Y_MIN 0.0
#define Y_MAX 220.0
#define Y_MIN 0.0
#define Y_MAX 220.0
@@
-140,7
+143,7
@@
This is the startup default and can be changed with M82/M83 while running.
*/
This is the startup default and can be changed with M82/M83 while running.
*/
-// #define E_ABSOLUTE
+#define E_ABSOLUTE
@@
-227,8
+230,8
@@
#define Y_STEP_PIN DIO23
#define Y_DIR_PIN DIO22
#define Y_STEP_PIN DIO23
#define Y_DIR_PIN DIO22
-//~ #define Y_MIN_PIN AIO6
-#define Y_MAX_PIN AIO5
+#define Y_MIN_PIN AIO6
+//~ #define Y_MAX_PIN AIO5
#define Y_ENABLE_PIN AIO7
//#define Y_INVERT_DIR
//~ #define Y_INVERT_MIN
#define Y_ENABLE_PIN AIO7
//#define Y_INVERT_DIR
//~ #define Y_INVERT_MIN
@@
-255,7
+258,7
@@
#define SD_WRITE_PROTECT DIO3
//#define PS_ON_PIN DIO14
#define SD_WRITE_PROTECT DIO3
//#define PS_ON_PIN DIO14
-#define PS_ON_PIN PD4 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
+#define PS_ON_PIN PB5 // on TechZoneComm Motherboard, SPI Port: MOSI
//#define STEPPER_ENABLE_PIN xxxx
//#define STEPPER_INVERT_ENABLE
//#define STEPPER_ENABLE_PIN xxxx
//#define STEPPER_INVERT_ENABLE
@@
-390,10
+393,8
@@
DEFINE_TEMP_SENSOR(bed, TT_INTERCOM, AIO1, 0)
I have searched high and low for a way to make the preprocessor do this for us, but so far I have not found a way.
*/
I have searched high and low for a way to make the preprocessor do this for us, but so far I have not found a way.
*/
-//#define HEATER_EXTRUDER HEATER_extruder
+// workaround for heated bed over intercom. HEATER_EXTRUDER, HEATER_BED are the intercom temp channel numbers.
#define HEATER_EXTRUDER 0
#define HEATER_EXTRUDER 0
-
-// workaround for heated bed over intercom. HEATER_BED is the intercom temp channel number.
#define HEATER_BED 1
#define HEATER_BED 1