X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=rf433ctl%2Ffind_onewire.pde;fp=rf433ctl%2Ffind_onewire.pde;h=0000000000000000000000000000000000000000;hp=8fedb62d9c0e7abe44d0110607c1dce8d0aa0576;hb=ff9137d257207a3a4b03c4f453cc1b7ce1e3cf17;hpb=a34e51d757fe52cb19de2937ae1b211894167524

diff --git a/rf433ctl/find_onewire.pde b/rf433ctl/find_onewire.pde
deleted file mode 100644
index 8fedb62..0000000
--- a/rf433ctl/find_onewire.pde
+++ /dev/null
@@ -1,86 +0,0 @@
-#include <OneWire.h>
-#include <DallasTemperature.h>
-
-/* DS18S20 Temperature chip i/o */
-
-OneWire  ds(8); 
-DallasTemperature sensors(&ds);
-
-DeviceAddress insideThermometer = { 0x10, 0xE7, 0x77, 0xD3, 0x01, 0x08, 0x00, 0x3F };
-
-void printTemperature(DeviceAddress deviceAddress)
-{
-  float tempC = sensors.getTempC(deviceAddress);
-  Serial.print("Temp C: ");
-  Serial.print(tempC);
-  Serial.print(" Temp F: ");
-  Serial.println(DallasTemperature::toFahrenheit(tempC)); // Converts tempC to Fahrenheit
-}
-
-void setup(void) {
-  Serial.begin(9600);
-  sensors.begin();
-}
-
-void loop(void) {
-  if (millis() < 2000)
-  {
-    return;
-  }
-  
-  printTemperature(insideThermometer);
-  
-  byte i;
-  byte present = 0;
-  byte data[12];
-  byte addr[8];
-  
-  if ( !ds.search(addr)) {
-    Serial.print("\nNo more addresses.\n");
-    ds.reset_search();
-    delay(250);
-    return;
-  }
-  
-  Serial.print("\nR=");
-  for( i = 0; i < 8; i++) {
-    Serial.print(addr[i], HEX);
-    Serial.print(" ");
-  }
-
-  if ( OneWire::crc8( addr, 7) != addr[7]) {
-      Serial.print("  CRC is not valid!\n");
-      return;
-  }
-  
-  if ( addr[0] != 0x10) {
-      Serial.print("\nDevice is not a DS18S20 family device.\n");
-      return;
-  }
-
-  // The DallasTemperature library can do all this work for you!
-
-  ds.reset();
-  ds.select(addr);
-  ds.write(0x44,1);         // start conversion, with parasite power on at the end
-  
-  delay(1000);     // maybe 750ms is enough, maybe not
-  // we might do a ds.depower() here, but the reset will take care of it.
-  
-  present = ds.reset();
-  ds.select(addr);    
-  ds.write(0xBE);         // Read Scratchpad
-
-  Serial.print("\nP=");
-  Serial.print(present,HEX);
-  Serial.print(" ");
-  for ( i = 0; i < 9; i++) {           // we need 9 bytes
-    data[i] = ds.read();
-    Serial.print(data[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-  Serial.print(" CRC=");
-  Serial.print( OneWire::crc8( data, 8), HEX);
-  Serial.println();
-}