X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=rf433ctl%2FDallasTemperature%2Fexamples%2FAlarmHandler%2FAlarmHandler.pde;fp=rf433ctl%2FDallasTemperature%2Fexamples%2FAlarmHandler%2FAlarmHandler.pde;h=0000000000000000000000000000000000000000;hp=d52e1f72c33714ebfc6385e298cb6f6b75878694;hb=ff9137d257207a3a4b03c4f453cc1b7ce1e3cf17;hpb=a34e51d757fe52cb19de2937ae1b211894167524

diff --git a/rf433ctl/DallasTemperature/examples/AlarmHandler/AlarmHandler.pde b/rf433ctl/DallasTemperature/examples/AlarmHandler/AlarmHandler.pde
deleted file mode 100644
index d52e1f7..0000000
--- a/rf433ctl/DallasTemperature/examples/AlarmHandler/AlarmHandler.pde
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <OneWire.h>
-#include <DallasTemperature.h>
-
-// Data wire is plugged into port 2 on the Arduino
-#define ONE_WIRE_BUS 3
-#define TEMPERATURE_PRECISION 9
-
-// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
-OneWire oneWire(ONE_WIRE_BUS);
-
-// Pass our oneWire reference to Dallas Temperature. 
-DallasTemperature sensors(&oneWire);
-
-// arrays to hold device addresses
-DeviceAddress insideThermometer, outsideThermometer;
-
-// function that will be called when an alarm condition exists during DallasTemperatures::processAlarms();
-void newAlarmHandler(uint8_t* deviceAddress)
-{
-  Serial.println("Alarm Handler Start"); 
-  printAlarmInfo(deviceAddress);
-  printTemp(deviceAddress);
-  Serial.println();
-  Serial.println("Alarm Handler Finish");
-}
-
-void printCurrentTemp(DeviceAddress deviceAddress)
-{
-  printAddress(deviceAddress);
-  printTemp(deviceAddress);
-  Serial.println();
-}
-
-void printAddress(DeviceAddress deviceAddress)
-{
-  Serial.print("Address: ");
-  for (uint8_t i = 0; i < 8; i++)
-  {
-    if (deviceAddress[i] < 16) Serial.print("0");
-    Serial.print(deviceAddress[i], HEX);
-  }
-  Serial.print(" ");
-}
-
-void printTemp(DeviceAddress deviceAddress)
-{
-  float tempC = sensors.getTempC(deviceAddress);
-  if (tempC != DEVICE_DISCONNECTED)
-  {
-    Serial.print("Current Temp C: ");
-    Serial.print(tempC);
-  }
-  else Serial.print("DEVICE DISCONNECTED");
-  Serial.print(" ");
-}
-
-void printAlarmInfo(DeviceAddress deviceAddress)
-{
-  char temp;
-  printAddress(deviceAddress);
-  temp = sensors.getHighAlarmTemp(deviceAddress);
-  Serial.print("High Alarm: ");
-  Serial.print(temp, DEC);
-  Serial.print("C");
-  Serial.print(" Low Alarm: ");
-  temp = sensors.getLowAlarmTemp(deviceAddress);
-  Serial.print(temp, DEC);
-  Serial.print("C");
-  Serial.print(" ");
-}
-
-void setup(void)
-{
-  // start serial port
-  Serial.begin(9600);
-  Serial.println("Dallas Temperature IC Control Library Demo");
-
-  // Start up the library
-  sensors.begin();
-  
-  // locate devices on the bus
-  Serial.print("Found ");
-  Serial.print(sensors.getDeviceCount(), DEC);
-  Serial.println(" devices.");
-
-  // search for devices on the bus and assign based on an index
-  if (!sensors.getAddress(insideThermometer, 0)) Serial.println("Unable to find address for Device 0"); 
-  if (!sensors.getAddress(outsideThermometer, 1)) Serial.println("Unable to find address for Device 1"); 
-
-  Serial.print("Device insideThermometer ");
-  printAlarmInfo(insideThermometer);
-  Serial.println();
-  
-  Serial.print("Device outsideThermometer ");
-  printAlarmInfo(outsideThermometer);
-  Serial.println();
-  
-  // set alarm ranges
-  Serial.println("Setting alarm temps...");
-  sensors.setHighAlarmTemp(insideThermometer, 26);
-  sensors.setLowAlarmTemp(insideThermometer, 22);
-  sensors.setHighAlarmTemp(outsideThermometer, 25);
-  sensors.setLowAlarmTemp(outsideThermometer, 21);
-  
-  Serial.print("New insideThermometer ");
-  printAlarmInfo(insideThermometer);
-  Serial.println();
-  
-  Serial.print("New outsideThermometer ");
-  printAlarmInfo(outsideThermometer);
-  Serial.println();
-
-  // attach alarm handler
-  sensors.setAlarmHandler(&newAlarmHandler);
-
-}
-
-void loop(void)
-{ 
-  // ask the devices to measure the temperature
-  sensors.requestTemperatures();
-  
-  // if an alarm condition exists as a result of the most recent 
-  // requestTemperatures() request, it exists until the next time 
-  // requestTemperatures() is called AND there isn't an alarm condition
-  // on the device
-  if (sensors.hasAlarm())
-  {
-    Serial.println("Oh noes!  There is at least one alarm on the bus.");
-  }
-
-  // call alarm handler function defined by sensors.setAlarmHandler
-  // for each device reporting an alarm
-  sensors.processAlarms();
-
-  if (!sensors.hasAlarm())
-  {
-    // just print out the current temperature
-    printCurrentTemp(insideThermometer);
-    printCurrentTemp(outsideThermometer);
-  }
-  
-  delay(1000);
-}
-