X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=reprap_mendel_prusa%2Fteacup_firmware%2Fconfig.h;h=c19a5021368863b1dfcfa14b90d5bd3b267a21bd;hp=696ac559b2acba163afc6233a9f0dc5108bbb2f5;hb=159777fa1cc26f3b215309af046b9aafd435a797;hpb=1630b5c97fd244142a7cde03623a2fc0f76b9110

diff --git a/reprap_mendel_prusa/teacup_firmware/config.h b/reprap_mendel_prusa/teacup_firmware/config.h
index 696ac55..c19a502 100644
--- a/reprap_mendel_prusa/teacup_firmware/config.h
+++ b/reprap_mendel_prusa/teacup_firmware/config.h
@@ -70,8 +70,8 @@
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define	STEPS_PER_M_Y					10047
 //#define	STEPS_PER_M_Y					8000
-//rechnerisch 8000, experimentell auf der Y-Achse 7960.0
-#define	STEPS_PER_M_Y					7960
+//rechnerisch 8000, experimentell auf der Y-Achse 8164.0
+#define	STEPS_PER_M_Y					8164
 //160000 für single step mit M8 Muttern, 320000 für half-step mit M8 Muttern
 //200 steps / 1.25 * 1000 * 2
 #define	STEPS_PER_M_Z					320000
@@ -89,8 +89,8 @@
 // Extruder gear ratio Gr = 14.0 / 43.0
 // STEPS_PER_M_E = 1m / (Gr * u_schraube) * motor_steps ¨~= 27933
 //#define	STEPS_PER_M_E		27933
-//experimentell (ohne Düse) mit 200mm:
-#define	STEPS_PER_M_E	99455
+//experimentell (ohne Düse): 99455 previousvalue *(200.0mm software/194.0mm echt) = 102530.93
+#define	STEPS_PER_M_E	102531
 
 
 /*