X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=reprap_mendel_prusa%2Fr3_reprap_slic3r_config.ini;fp=reprap_mendel_prusa%2Fr3_reprap_slic3r_config.ini;h=0000000000000000000000000000000000000000;hp=b5afc9b171a8ef78e3ec4955ef27278f91162124;hb=5f90a9da59975c3bf81efc461fcd13637e4e0e5d;hpb=d3c3c6e7915c02cbb522adba40baff52e3fa9fe4

diff --git a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini b/reprap_mendel_prusa/r3_reprap_slic3r_config.ini
deleted file mode 100644
index b5afc9b..0000000
--- a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini
+++ /dev/null
@@ -1,114 +0,0 @@
-# generated by Slic3r 0.9.10b on Mon Aug  5 03:02:23 2013
-avoid_crossing_perimeters = 0
-bed_size = 185,185
-bed_temperature = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 1
-cooling = 1
-default_acceleration = 0
-disable_fan_first_layers = 2
-duplicate = 1
-duplicate_distance = 6
-duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM2 ; print finished
-external_perimeter_speed = 70%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1.04
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 3
-fill_angle = 45
-fill_density = 0.45
-fill_pattern = honeycomb
-first_layer_bed_temperature = 50
-first_layer_extrusion_width = 200%
-first_layer_height = 120%
-first_layer_speed = 30%
-first_layer_temperature = 190
-g0 = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = teacup
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-layer_gcode = 
-layer_height = 0.38
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
-notes = 
-nozzle_diameter = 0.5
-only_retract_when_crossing_perimeters = 1
-output_filename_format = [input_filename_base].gcode
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_center = 75,95
-raft_layers = 0
-randomize_start = 0
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 0
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 1
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-rotate = 0
-scale = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 3
-slowdown_below_layer_time = 30
-small_perimeter_speed = 30
-solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_layers = 0
-support_material_interface_spacing = 0
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 0
-temperature = 0
-threads = 2
-toolchange_gcode = 
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 130
-use_relative_e_distances = 0
-vibration_limit = 40
-wipe = 0
-z_offset = 0