X-Git-Url: https://git.realraum.at/?p=svn42.git;a=blobdiff_plain;f=firmware-messages.txt;fp=firmware-messages.txt;h=0000000000000000000000000000000000000000;hp=a58c54014fb6e2f8a7a8ebf1b181f1dfbb146a78;hb=ce52b2a412383c7958cbd6f0dc8251fbf28b3c08;hpb=4ee2501ff864b8e15202ee814e8bafcc0c2adf6c

diff --git a/firmware-messages.txt b/firmware-messages.txt
deleted file mode 100644
index a58c540..0000000
--- a/firmware-messages.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-###############################################################
-/dev/ttyUSB0: door key printer
-
-
- Messages:
-  after reset:
-   init complete
-
-  manual open key pressed:
-   open forced manually
-
-  manual close key pressed:
-   close forced manually
-
-  closing or opening finished
-   Status: closed|opened, idle
-
-  closing or opening timeout:
-   Error: open/close took too long!
-
- commands:
-  c ... close
-   response: "Ok", "Already closed", "Error: .*"
-  o ... open
-   response: "Ok", "Already opened", "Error: .*"
-  t ... toggle
-   responce: "Ok", "Error: .*"
-  s ... status
-   response: "Status: closed|opened|<->, opening|waiting|closing|idle, ajar|shut"
-         or  "Error: .*"
-  r ... reset
-   "Ok, closing now" or "Error: .*"
-  * ... everything else
-   Error: unknown command
-
- open/close  will only be accepted if Status: ..., idle, ...
-             otherwise response: Error: Operation in progress
-
- unless error case s will always be accepted
-
- Reset overrules all other operations in progress
-
- if an error occured every command besides r gets ingnored and
-   Error: last open/close operation took too long!
- is sent in response
-
-###############################################################
-