to github

[svn42.git] / rf433ctl / IRremote / examples / IRrecord / IRrecord.pde

diff --git a/rf433ctl/IRremote/examples/IRrecord/IRrecord.pde b/rf433ctl/IRremote/examples/IRrecord/IRrecord.pde
deleted file mode 100644 (file)
index a1cf878..0000000
--- a/rf433ctl/IRremote/examples/IRrecord/IRrecord.pde
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * IRrecord: record and play back IR signals as a minimal 
- * An IR detector/demodulator must be connected to the input RECV_PIN.
- * An IR LED must be connected to the output PWM pin 3.
- * A button must be connected to the input BUTTON_PIN; this is the
- * send button.
- * A visible LED can be connected to STATUS_PIN to provide status.
- *
- * The logic is:
- * If the button is pressed, send the IR code.
- * If an IR code is received, record it.
- *
- * Version 0.11 September, 2009
- * Copyright 2009 Ken Shirriff
- * http://arcfn.com
- */
-
-#include <IRremote.h>
-
-int RECV_PIN = 11;
-int BUTTON_PIN = 12;
-int STATUS_PIN = 13;
-
-IRrecv irrecv(RECV_PIN);
-IRsend irsend;
-
-decode_results results;
-
-void setup()
-{
-  Serial.begin(9600);
-  irrecv.enableIRIn(); // Start the receiver
-  pinMode(BUTTON_PIN, INPUT);
-  pinMode(STATUS_PIN, OUTPUT);
-}
-
-// Storage for the recorded code
-int codeType = -1; // The type of code
-unsigned long codeValue; // The code value if not raw
-unsigned int rawCodes[RAWBUF]; // The durations if raw
-int codeLen; // The length of the code
-int toggle = 0; // The RC5/6 toggle state
-
-// Stores the code for later playback
-// Most of this code is just logging
-void storeCode(decode_results *results) {
-  codeType = results->decode_type;
-  int count = results->rawlen;
-  if (codeType == UNKNOWN) {
-    Serial.println("Received unknown code, saving as raw");
-    codeLen = results->rawlen - 1;
-    // To store raw codes:
-    // Drop first value (gap)
-    // Convert from ticks to microseconds
-    // Tweak marks shorter, and spaces longer to cancel out IR receiver distortion
-    for (int i = 1; i <= codeLen; i++) {
-      if (i % 2) {
-        // Mark
-        rawCodes[i - 1] = results->rawbuf[i]*USECPERTICK - MARK_EXCESS;
-        Serial.print(" m");
-      } 
-      else {
-        // Space
-        rawCodes[i - 1] = results->rawbuf[i]*USECPERTICK + MARK_EXCESS;
-        Serial.print(" s");
-      }
-      Serial.print(rawCodes[i - 1], DEC);
-    }
-    Serial.println("");
-  }
-  else {
-    if (codeType == NEC) {
-      Serial.print("Received NEC: ");
-      if (results->value == REPEAT) {
-        // Don't record a NEC repeat value as that's useless.
-        Serial.println("repeat; ignoring.");
-        return;
-      }
-    } 
-    else if (codeType == SONY) {
-      Serial.print("Received SONY: ");
-    } 
-    else if (codeType == RC5) {
-      Serial.print("Received RC5: ");
-    } 
-    else if (codeType == RC6) {
-      Serial.print("Received RC6: ");
-    } 
-    else {
-      Serial.print("Unexpected codeType ");
-      Serial.print(codeType, DEC);
-      Serial.println("");
-    }
-    Serial.println(results->value, HEX);
-    codeValue = results->value;
-    codeLen = results->bits;
-  }
-}
-
-void sendCode(int repeat) {
-  if (codeType == NEC) {
-    if (repeat) {
-      irsend.sendNEC(REPEAT, codeLen);
-      Serial.println("Sent NEC repeat");
-    } 
-    else {
-      irsend.sendNEC(codeValue, codeLen);
-      Serial.print("Sent NEC ");
-      Serial.println(codeValue, HEX);
-    }
-  } 
-  else if (codeType == SONY) {
-    irsend.sendSony(codeValue, codeLen);
-    Serial.print("Sent Sony ");
-    Serial.println(codeValue, HEX);
-  } 
-  else if (codeType == RC5 || codeType == RC6) {
-    if (!repeat) {
-      // Flip the toggle bit for a new button press
-      toggle = 1 - toggle;
-    }
-    // Put the toggle bit into the code to send
-    codeValue = codeValue & ~(1 << (codeLen - 1));
-    codeValue = codeValue | (toggle << (codeLen - 1));
-    if (codeType == RC5) {
-      Serial.print("Sent RC5 ");
-      Serial.println(codeValue, HEX);
-      irsend.sendRC5(codeValue, codeLen);
-    } 
-    else {
-      irsend.sendRC6(codeValue, codeLen);
-      Serial.print("Sent RC6 ");
-      Serial.println(codeValue, HEX);
-    }
-  } 
-  else if (codeType == UNKNOWN /* i.e. raw */) {
-    // Assume 38 KHz
-    irsend.sendRaw(rawCodes, codeLen, 38);
-    Serial.println("Sent raw");
-  }
-}
-
-int lastButtonState;
-
-void loop() {
-  // If button pressed, send the code.
-  int buttonState = digitalRead(BUTTON_PIN);
-  if (lastButtonState == HIGH && buttonState == LOW) {
-    Serial.println("Released");
-    irrecv.enableIRIn(); // Re-enable receiver
-  }
-
-  if (buttonState) {
-    Serial.println("Pressed, sending");
-    digitalWrite(STATUS_PIN, HIGH);
-    sendCode(lastButtonState == buttonState);
-    digitalWrite(STATUS_PIN, LOW);
-    delay(50); // Wait a bit between retransmissions
-  } 
-  else if (irrecv.decode(&results)) {
-    digitalWrite(STATUS_PIN, HIGH);
-    storeCode(&results);
-    irrecv.resume(); // resume receiver
-    digitalWrite(STATUS_PIN, LOW);
-  }
-  lastButtonState = buttonState;
-}
-
-
-
-
-
-
-\r