+++ /dev/null
-Arduino Library for Dallas Temperature ICs
-==========================================
-
-Usage
------
-
-This library supports the following devices:
- DS18B20
- DS18S20 - Please note there appears to be an issue with this series.
- DS1822
-
-You will need a pull-up resistor of about 5 KOhm between the 1-Wire data line
-and your 5V power. If you are using the DS18B20, ground pins 1 and 3. The
-centre pin is the data line '1-wire'.
-
-We have included a "REQUIRESNEW" and "REQUIRESALARMS" definition. If you
-want to slim down the code feel free to use either of these by including
-#define REQUIRESNEW or #define REQUIRESALARMS a the top of DallasTemperature.h
-
-Credits
--------
-
-The OneWire code has been derived from
-http://www.arduino.cc/playground/Learning/OneWire.
-Miles Burton <miles@mnetcs.com> originally developed this library.
-Tim Newsome <nuisance@casualhacker.net> added support for multiple sensors on
-the same bus.
-Guil Barros [gfbarros@bappos.com] added getTempByAddress (v3.5)
-
-Website
--------
-
-You can find the latest version of the library at
-http://milesburton.com/index.php?title=Dallas_Temperature_Control_Library
-
-License
--------
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Lesser General Public
-License as published by the Free Software Foundation; either
-version 2.1 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Lesser General Public License for more details.
-
-You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
projects / svn42.git / blobdiff