+++ /dev/null
-## see README file
-
-TARGET = tuer
-INSTALL_DIR = $(PWD)/arduino
-PORT = /dev/door
-#UPLOAD_RATE = 19200
-UPLOAD_RATE = 57600
-AVRDUDE_PROGRAMMER = stk500v1
-#MCU = atmega168
-MCU = atmega328p
-#F_CPU = 16000000
-F_CPU = 16000000L
-
-############################################################################
-# Below here nothing should be changed...
-
-RESET_TTY_DIR=../reset_tty/
-RESET_TTY=$(RESET_TTY_DIR)reset_tty
-ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino
-AVR_TOOLS_PATH = /usr/bin
-SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
-$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
-$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \
-$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c
-CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/Print.cpp $(ARDUINO)/WMath.cpp
-FORMAT = ihex
-
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-# Place -D or -U options here
-CDEFS = -DF_CPU=$(F_CPU)
-CXXDEFS = -DF_CPU=$(F_CPU)
-
-# Place -I options here
-CINCS = -I$(ARDUINO)
-CXXINCS = -I$(ARDUINO)
-
-# Compiler flag to set the C Standard level.
-# c89 - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99 - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-
-CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
-CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-LDFLAGS = -lm
-
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PORT = $(PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \
--p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
--b $(UPLOAD_RATE)
-
-# Program settings
-CC = $(AVR_TOOLS_PATH)/avr-gcc
-CXX = $(AVR_TOOLS_PATH)/avr-g++
-OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
-AR = $(AVR_TOOLS_PATH)/avr-ar
-SIZE = $(AVR_TOOLS_PATH)/avr-size
-NM = $(AVR_TOOLS_PATH)/avr-nm
-AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: applet_files build sizeafter
-
-build: elf hex
-
-applet_files: $(TARGET).pde
- # Here is the "preprocessing".
- # It creates a .cpp file based with the same name as the .pde file.
- # On top of the new .cpp file comes the WProgram.h header.
- # At the end there is a generic main() function attached.
- # Then the .cpp file will be compiled. Errors during compile will
- # refer to this new, automatically generated, file.
- # Not the original .pde file you actually edit...
- test -d applet || mkdir applet
- echo '#include "WProgram.h"' > applet/$(TARGET).cpp
- cat $(TARGET).pde >> applet/$(TARGET).cpp
- cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp
-
-elf: applet/$(TARGET).elf
-hex: applet/$(TARGET).hex
-eep: applet/$(TARGET).eep
-lss: applet/$(TARGET).lss
-sym: applet/$(TARGET).sym
-
-# Program the device.
-upload: applet/$(TARGET).hex $(RESET_TTY)
- $(RESET_TTY) $(PORT)
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-
-$(RESET_TTY):
- make -C $(RESET_TTY_DIR)
-
- # Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
-ELFSIZE = $(SIZE) applet/$(TARGET).elf
-sizebefore:
- @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
-
-sizeafter:
- @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000
-
-
-coff: applet/$(TARGET).elf
- $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym
-
-.elf.hex:
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
- $(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
- $(NM) -n $< > $@
-
- # Link: create ELF output file from library.
-applet/$(TARGET).elf: $(TARGET).pde applet/core.a
- $(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
-
-applet/core.a: $(OBJ)
- @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
-
-
-
-# Compile: create object files from C++ source files.
-.cpp.o:
- $(CXX) -c $(ALL_CXXFLAGS) $< -o $@
-
-# Compile: create object files from C source files.
-.c.o:
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-.c.s:
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-
-# Target: clean project.
-clean:
- $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
- applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
- $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
-
-depend:
- if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \
- then \
- sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \
- $(MAKEFILE).$$$$ && \
- $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \
- fi
- echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \
- >> $(MAKEFILE); \
- $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE)
-
-.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter
projects / svn42.git / blobdiff