From e44e0588ead1ab6341b959e7b24bef899b6bce5e Mon Sep 17 00:00:00 2001 From: Bernhard Tittelbach Date: Wed, 10 Jul 2013 22:04:41 +0000 Subject: [PATCH] achse umgebaut, neu kalibriert --- teacup_firmware/config.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h index 696ac55..c19a502 100644 --- a/teacup_firmware/config.h +++ b/teacup_firmware/config.h @@ -70,8 +70,8 @@ // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne) //#define STEPS_PER_M_Y 10047 //#define STEPS_PER_M_Y 8000 -//rechnerisch 8000, experimentell auf der Y-Achse 7960.0 -#define STEPS_PER_M_Y 7960 +//rechnerisch 8000, experimentell auf der Y-Achse 8164.0 +#define STEPS_PER_M_Y 8164 //160000 für single step mit M8 Muttern, 320000 für half-step mit M8 Muttern //200 steps / 1.25 * 1000 * 2 #define STEPS_PER_M_Z 320000 @@ -89,8 +89,8 @@ // Extruder gear ratio Gr = 14.0 / 43.0 // STEPS_PER_M_E = 1m / (Gr * u_schraube) * motor_steps ¨~= 27933 //#define STEPS_PER_M_E 27933 -//experimentell (ohne Düse) mit 200mm: -#define STEPS_PER_M_E 99455 +//experimentell (ohne Düse): 99455 previousvalue *(200.0mm software/194.0mm echt) = 102530.93 +#define STEPS_PER_M_E 102531 /* -- 1.7.10.4