X-Git-Url: https://git.realraum.at/?p=reprap_mendel_prusa.git;a=blobdiff_plain;f=teacup_firmware%2Fconfig.h;h=696ac559b2acba163afc6233a9f0dc5108bbb2f5;hp=4f015d900c1e9114a4bcfdfcc3cdf1664ef5b79d;hb=a501b777105ebdc03cbfdaa7be9a69f3898e46e8;hpb=0b1f72c5ba7b89321a6629535c8562d75ca9c2ea

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index 4f015d9..696ac55 100644
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -64,13 +64,14 @@
 */
 //#define	STEPS_PER_M_X					10047
 //#define	STEPS_PER_M_X					8000
-//rechnerisch 8000, experimentell auf der X-Achse 7684.8395
-#define	STEPS_PER_M_X				    7685
+//rechnerisch 8000, experimentell auf der X-Achse 8963.59
+//rechnerisch 8000, experimentell auf der X-Achse 8075.67
+#define	STEPS_PER_M_X				    8050
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define	STEPS_PER_M_Y					10047
 //#define	STEPS_PER_M_Y					8000
-//rechnerisch 8000, experimentell auf der Y-Achse 6766.1691
-#define	STEPS_PER_M_Y					6766
+//rechnerisch 8000, experimentell auf der Y-Achse 7960.0
+#define	STEPS_PER_M_Y					7960
 //160000 für single step mit M8 Muttern, 320000 für half-step mit M8 Muttern
 //200 steps / 1.25 * 1000 * 2
 #define	STEPS_PER_M_Z					320000
@@ -88,9 +89,7 @@
 // Extruder gear ratio Gr = 14.0 / 43.0
 // STEPS_PER_M_E = 1m / (Gr * u_schraube) * motor_steps ¨~= 27933
 //#define	STEPS_PER_M_E		27933
-//experimentell 220mm:
-//#define	STEPS_PER_M_E	109400  
-//experimentell 200mm:
+//experimentell (ohne Düse) mit 200mm:
 #define	STEPS_PER_M_E	99455
 
 
@@ -133,7 +132,7 @@
 #define	X_MAX			180.0
 
 #define	Y_MIN			0.0
-#define	Y_MAX			220.0
+#define	Y_MAX			195.0
 
 #define	Z_MIN			0.0
 #define	Z_MAX			125.0
@@ -396,6 +395,7 @@ DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
 // workaround for heated bed over intercom. HEATER_EXTRUDER, HEATER_BED are the intercom temp channel numbers.
 #define	HEATER_EXTRUDER 0
 #define HEATER_BED 1
+#define HEATER_FAN 2