reprap config.h und slic3r config

[reprap_mendel_prusa.git] / teacup_firmware / config.h

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index bab04fe..696ac55 100644 (file)
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -64,20 +64,34 @@
 */
 //#define      STEPS_PER_M_X                                   10047
 //#define      STEPS_PER_M_X                                   8000
-#define        STEPS_PER_M_X                                   6766
+//rechnerisch 8000, experimentell auf der X-Achse 8963.59
+//rechnerisch 8000, experimentell auf der X-Achse 8075.67
+#define        STEPS_PER_M_X                               8050
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define      STEPS_PER_M_Y                                   10047
 //#define      STEPS_PER_M_Y                                   8000
-//rechnerisch 8000, experimentell auf der Y-Achse 6766.1691
-#define        STEPS_PER_M_Y                                   6766
+//rechnerisch 8000, experimentell auf der Y-Achse 7960.0
+#define        STEPS_PER_M_Y                                   7960
 //160000 für single step mit M8 Muttern, 320000 für half-step mit M8 Muttern
 //200 steps / 1.25 * 1000 * 2
 #define        STEPS_PER_M_Z                                   320000
 
 /// http://blog.arcol.hu/?p=157 may help with this one
-#define        STEPS_PER_M_E                                   35200
+//#define      STEPS_PER_M_E                                   35200
 // Extruder gear ratio Gr = 14.0 / 43.0
-// Extruder nozzle diameter = 0.5 (? oder 0.35, oder 0.25)
+// Extruder nozzle diameter = 0.5mm (bzw 0.35mm mit unserer anderen Düse)
+// Filament Width = 3mm
+
+
+// d_schraube ~= 0.007m
+// u_schraube = d_schraube * pi ~= 0.022m
+// motor_steps for 1 circumfence = 200
+// Extruder gear ratio Gr = 14.0 / 43.0
+// STEPS_PER_M_E = 1m / (Gr * u_schraube) * motor_steps ¨~= 27933
+//#define      STEPS_PER_M_E           27933
+//experimentell (ohne Düse) mit 200mm:
+#define        STEPS_PER_M_E   99455
+
 
 /*
        Values depending on the capabilities of your stepper motors and other mechanics.
@@ -113,10 +127,12 @@
 */
 
 #define        X_MIN                   0.0
-#define        X_MAX                   184.0
+// eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
+//#define      X_MAX                   184.0
+#define        X_MAX                   180.0
 
 #define        Y_MIN                   0.0
-#define        Y_MAX                   220.0
+#define        Y_MAX                   195.0
 
 #define        Z_MIN                   0.0
 #define        Z_MAX                   125.0
@@ -126,7 +142,7 @@
 
        This is the startup default and can be changed with M82/M83 while running.
 */
-// #define E_ABSOLUTE
+#define E_ABSOLUTE
 
 
 
@@ -204,7 +220,7 @@
 #define        X_STEP_PIN                                              DIO15
 #define        X_DIR_PIN                                                       DIO18
 //~ #define    X_MIN_PIN                                                       DIO20
-//~ #define    X_MAX_PIN                                                       DIO21
+#define        X_MAX_PIN                                                       DIO21
 #define        X_ENABLE_PIN                                    DIO19
 //#define      X_INVERT_DIR
 //~ #define    X_INVERT_MIN
@@ -213,8 +229,8 @@
 
 #define        Y_STEP_PIN                                              DIO23
 #define        Y_DIR_PIN                                                       DIO22
-//~ #define    Y_MIN_PIN                                                       AIO6
-#define        Y_MAX_PIN                                                       AIO5
+#define        Y_MIN_PIN                                                       AIO6
+//~ #define    Y_MAX_PIN                                                       AIO5
 #define        Y_ENABLE_PIN                                    AIO7
 //#define      Y_INVERT_DIR
 //~ #define    Y_INVERT_MIN
@@ -241,7 +257,7 @@
 #define        SD_WRITE_PROTECT                        DIO3
 
 //#define      PS_ON_PIN                                                       DIO14
-#define        PS_ON_PIN                                                       PD4 // on TCC Motherboard, JTAG Port, TDI Pin
+#define        PS_ON_PIN                                                       PB5 // on TechZoneComm Motherboard, SPI Port: MOSI
 //#define      STEPPER_ENABLE_PIN              xxxx
 //#define      STEPPER_INVERT_ENABLE
 
@@ -376,10 +392,10 @@ DEFINE_TEMP_SENSOR(bed,       TT_INTERCOM,    AIO1,      0)
        I have searched high and low for a way to make the preprocessor do this for us, but so far I have not found a way.
 */
 
-// #define     HEATER_EXTRUDER HEATER_extruder
-
-// workaround for heated bed over intercom. HEATER_BED is the intercom temp channel number.
+// workaround for heated bed over intercom. HEATER_EXTRUDER, HEATER_BED are the intercom temp channel numbers.
+#define        HEATER_EXTRUDER 0
 #define HEATER_BED 1
+#define HEATER_FAN 2