change PS_ON_PIN to PB5, cause PC5 had double use as x-max endstop pin

[reprap_mendel_prusa.git] / teacup_firmware / config.h

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index 6fbaa3c..03446d5 100644 (file)
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -64,7 +64,8 @@
 */
 //#define      STEPS_PER_M_X                                   10047
 //#define      STEPS_PER_M_X                                   8000
-#define        STEPS_PER_M_X                                   6766
+//rechnerisch 8000, experimentell auf der X-Achse 7684.8395
+#define        STEPS_PER_M_X                               7685
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define      STEPS_PER_M_Y                                   10047
 //#define      STEPS_PER_M_Y                                   8000
@@ -127,7 +128,9 @@
 */
 
 #define        X_MIN                   0.0
-#define        X_MAX                   184.0
+// eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
+//#define      X_MAX                   184.0
+#define        X_MAX                   180.0
 
 #define        Y_MIN                   0.0
 #define        Y_MAX                   220.0
@@ -255,7 +258,7 @@
 #define        SD_WRITE_PROTECT                        DIO3
 
 //#define      PS_ON_PIN                                                       DIO14
-#define        PS_ON_PIN                                                       PD4 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
+#define        PS_ON_PIN                                                       PB5 // on TechZoneComm Motherboard, SPI Port: MOSI
 //#define      STEPPER_ENABLE_PIN              xxxx
 //#define      STEPPER_INVERT_ENABLE