From 765ac8fb54d97fb6b7dc92edf501a8e71e9ee14f Mon Sep 17 00:00:00 2001 From: Bernhard Tittelbach Date: Mon, 5 Aug 2013 01:03:17 +0000 Subject: [PATCH] reprap settings --- reprap_mendel_prusa/r3_reprap_slic3r_config.ini | 44 +++++++++++------------ 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini b/reprap_mendel_prusa/r3_reprap_slic3r_config.ini index 05b78f9..b5afc9b 100644 --- a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini +++ b/reprap_mendel_prusa/r3_reprap_slic3r_config.ini @@ -1,21 +1,21 @@ -# generated by Slic3r 0.9.10b on Tue Jul 9 07:03:03 2013 -avoid_crossing_perimeters = 1 -bed_size = 180,220 +# generated by Slic3r 0.9.10b on Mon Aug 5 03:02:23 2013 +avoid_crossing_perimeters = 0 +bed_size = 185,185 bed_temperature = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 3 bridge_acceleration = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 0 -complete_objects = 0 +complete_objects = 1 cooling = 1 default_acceleration = 0 -disable_fan_first_layers = 1 +disable_fan_first_layers = 2 duplicate = 1 duplicate_distance = 6 duplicate_grid = 1,1 -end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\nM2 ; send print end command +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\nM2 ; print finished external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 @@ -23,33 +23,33 @@ extruder_clearance_height = 20 extruder_clearance_radius = 20 extruder_offset = 0x0 extrusion_axis = E -extrusion_multiplier = 1 +extrusion_multiplier = 1.04 extrusion_width = 0 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 3 fill_angle = 45 -fill_density = 0.5 +fill_density = 0.45 fill_pattern = honeycomb -first_layer_bed_temperature = 0 +first_layer_bed_temperature = 50 first_layer_extrusion_width = 200% -first_layer_height = 0.5 +first_layer_height = 120% first_layer_speed = 30% -first_layer_temperature = 215 +first_layer_temperature = 190 g0 = 0 gap_fill_speed = 20 gcode_arcs = 0 gcode_comments = 0 gcode_flavor = teacup infill_acceleration = 0 -infill_every_layers = 10 +infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 60 layer_gcode = -layer_height = 0.3 +layer_height = 0.38 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 @@ -64,23 +64,23 @@ perimeter_extrusion_width = 0 perimeter_speed = 30 perimeters = 3 post_process = -print_center = 90,110 +print_center = 75,95 raft_layers = 0 randomize_start = 0 resolution = 0 retract_before_travel = 2 retract_layer_change = 1 -retract_length = 5 +retract_length = 0 retract_length_toolchange = 10 -retract_lift = 1 -retract_restart_extra = 0 +retract_lift = 0 +retract_restart_extra = 1 retract_restart_extra_toolchange = 0 retract_speed = 30 rotate = 0 scale = 1 skirt_distance = 6 skirt_height = 1 -skirts = 1 +skirts = 3 slowdown_below_layer_time = 30 small_perimeter_speed = 30 solid_fill_pattern = rectilinear @@ -101,14 +101,14 @@ support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 210 +temperature = 0 threads = 2 toolchange_gcode = top_infill_extrusion_width = 0 top_solid_infill_speed = 50 -top_solid_layers = 4 +top_solid_layers = 3 travel_speed = 130 use_relative_e_distances = 0 -vibration_limit = 0 +vibration_limit = 40 wipe = 0 z_offset = 0 -- 1.7.10.4