From: Bernhard Tittelbach <xro@realraum.at>
Date: Sun, 7 Jul 2013 09:41:45 +0000 (+0000)
Subject: teacup update, relocated Y-endpos sensor, use gcode e_absolute default
X-Git-Url: https://git.realraum.at/?a=commitdiff_plain;h=4fc2ea02db4db3ca3bfb84e6e14996196900eb71;p=svn42.git

teacup update, relocated Y-endpos sensor, use gcode e_absolute default
---

diff --git a/reprap_mendel_prusa/teacup_firmware/config.h b/reprap_mendel_prusa/teacup_firmware/config.h
index 03446d5..bbce7de 100644
--- a/reprap_mendel_prusa/teacup_firmware/config.h
+++ b/reprap_mendel_prusa/teacup_firmware/config.h
@@ -143,7 +143,7 @@
 
 	This is the startup default and can be changed with M82/M83 while running.
 */
-// #define E_ABSOLUTE
+#define E_ABSOLUTE
 
 
 
@@ -230,8 +230,8 @@
 
 #define	Y_STEP_PIN						DIO23
 #define	Y_DIR_PIN							DIO22
-//~ #define	Y_MIN_PIN							AIO6
-#define	Y_MAX_PIN							AIO5
+#define	Y_MIN_PIN							AIO6
+//~ #define	Y_MAX_PIN							AIO5
 #define	Y_ENABLE_PIN					AIO7
 //#define	Y_INVERT_DIR
 //~ #define	Y_INVERT_MIN