From: Bernhard Tittelbach Date: Tue, 9 Jul 2013 06:12:21 +0000 (+0000) Subject: reprap notes und slic3r config X-Git-Url: https://git.realraum.at/?a=commitdiff_plain;h=0b1f72c5ba7b89321a6629535c8562d75ca9c2ea;p=reprap_mendel_prusa.git reprap notes und slic3r config --- diff --git a/notes.txt b/notes.txt new file mode 100644 index 0000000..41ee8d9 --- /dev/null +++ b/notes.txt @@ -0,0 +1,13 @@ +r3 reprap Firmware: + https://github.com/btittelbach/Teacup_Firmware + +Slic3r Gcode Generator: + http://slic3r.org/ + +PrintRun Frontend + https://github.com/kliment/Printrun + + +Problems with Teacup: +Gcode "M116" aka "Wait until temperature reached" kann ewig hängen. +Besser die Temperatur manuell einstellen, M116 vom Gcode entfernen und dann drucken. diff --git a/r3_reprap_slic3r_config.ini b/r3_reprap_slic3r_config.ini new file mode 100644 index 0000000..05b78f9 --- /dev/null +++ b/r3_reprap_slic3r_config.ini @@ -0,0 +1,114 @@ +# generated by Slic3r 0.9.10b on Tue Jul 9 07:03:03 2013 +avoid_crossing_perimeters = 1 +bed_size = 180,220 +bed_temperature = 0 +bottom_solid_layers = 4 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 1 +duplicate = 1 +duplicate_distance = 6 +duplicate_grid = 1,1 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\nM2 ; send print end command +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_diameter = 3 +fill_angle = 45 +fill_density = 0.5 +fill_pattern = honeycomb +first_layer_bed_temperature = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.5 +first_layer_speed = 30% +first_layer_temperature = 215 +g0 = 0 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = teacup +infill_acceleration = 0 +infill_every_layers = 10 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 60 +layer_gcode = +layer_height = 0.3 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.5 +only_retract_when_crossing_perimeters = 1 +output_filename_format = [input_filename_base].gcode +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 3 +post_process = +print_center = 90,110 +raft_layers = 0 +randomize_start = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 5 +retract_length_toolchange = 10 +retract_lift = 1 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +rotate = 0 +scale = 1 +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 30 +small_perimeter_speed = 30 +solid_fill_pattern = rectilinear +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_layers = 0 +support_material_interface_spacing = 0 +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +temperature = 210 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 130 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0