From: Bernhard Tittelbach <xro@realraum.at>
Date: Sun, 7 Jul 2013 06:18:21 +0000 (+0000)
Subject: automatically switch on powersupply; boards.txt for our bootloader on mainboard
X-Git-Url: https://git.realraum.at/?a=commitdiff_plain;h=0838a4eb18086ac0d03612b977a451a9286a34f2;p=reprap_mendel_prusa.git

automatically switch on powersupply; boards.txt for our bootloader on mainboard
---

diff --git a/arduino_sanguino/boards.txt b/arduino_sanguino/boards.txt
new file mode 100644
index 0000000..fa3a975
--- /dev/null
+++ b/arduino_sanguino/boards.txt
@@ -0,0 +1,65 @@
+############################################################
+
+atmega644.name=Sanguino W/ ATmega644P
+
+atmega644.upload.protocol=arduino
+##atmega644.upload.protocol=stk500
+atmega644.upload.maximum_size=63488
+atmega644.upload.speed=115200
+##atmega644.upload.speed=57600
+
+atmega644.bootloader.low_fuses=0xFF
+atmega644.bootloader.high_fuses=0x9A
+atmega644.bootloader.extended_fuses=0xFF
+atmega644.bootloader.path=atmega
+atmega644.bootloader.file=ATmegaBOOT_168_atmega644p.hex
+#atmega644.bootloader.file=ATmegaBOOT_644P.hex
+atmega644.bootloader.unlock_bits=0x3F
+atmega644.bootloader.lock_bits=0x0F
+
+atmega644.build.mcu=atmega644p
+atmega644.build.f_cpu=16000000L
+atmega644.build.core=arduino
+atmega644.build.variant=standard
+##############################################################
+
+atmega12848m.name=Sanguino W/ ATmega1284p 8mhz
+
+atmega12848m.upload.protocol=stk500
+atmega12848m.upload.maximum_size=131072
+atmega12848m.upload.speed=19200
+
+atmega12848m.bootloader.low_fuses=0xFD
+atmega12848m.bootloader.high_fuses=0x9A
+atmega12848m.bootloader.extended_fuses=0xFF
+atmega12848m.bootloader.path=atmega
+atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
+atmega12848m.bootloader.unlock_bits=0x3F
+atmega12848m.bootloader.lock_bits=0x0F
+
+atmega12848m.build.mcu=atmega1284p
+atmega12848m.build.f_cpu=8000000L
+atmega12848m.build.core=arduino
+atmega12848m.build.variant=standard
+
+##############################################################
+
+atmega1284.name=Sanguino W/ ATmega1284p 16mhz
+
+atmega1284.upload.protocol=stk500
+atmega1284.upload.maximum_size=131072
+atmega1284.upload.speed=57600
+
+atmega1284.bootloader.low_fuses=0xFF
+atmega1284.bootloader.high_fuses=0x9A
+atmega1284.bootloader.extended_fuses=0xFF
+atmega1284.bootloader.path=atmega
+atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
+atmega1284.bootloader.unlock_bits=0x3F
+atmega1284.bootloader.lock_bits=0x0F
+
+atmega1284.build.mcu=atmega1284p
+atmega1284.build.f_cpu=16000000L
+atmega1284.build.core=arduino
+atmega1284.build.variant=standard
+#
diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index 564ff71..9a32a76 100644
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -258,7 +258,7 @@
 #define	SD_WRITE_PROTECT			DIO3
 
 //#define	PS_ON_PIN							DIO14
-#define	PS_ON_PIN							PD4 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
+#define	PS_ON_PIN							PC5 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
 //#define	STEPPER_ENABLE_PIN		xxxx
 //#define	STEPPER_INVERT_ENABLE