reprap settings

diff --git a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini b/reprap_mendel_prusa/r3_reprap_slic3r_config.ini
index 05b78f9..b5afc9b 100644 (file)
--- a/reprap_mendel_prusa/r3_reprap_slic3r_config.ini
+++ b/reprap_mendel_prusa/r3_reprap_slic3r_config.ini
@@ -1,21 +1,21 @@
-# generated by Slic3r 0.9.10b on Tue Jul  9 07:03:03 2013
-avoid_crossing_perimeters = 1
-bed_size = 180,220
+# generated by Slic3r 0.9.10b on Mon Aug  5 03:02:23 2013
+avoid_crossing_perimeters = 0
+bed_size = 185,185
 bed_temperature = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
-complete_objects = 0
+complete_objects = 1
 cooling = 1
 default_acceleration = 0
-disable_fan_first_layers = 1
+disable_fan_first_layers = 2
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM2 ; send print end command
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM2 ; print finished
 external_perimeter_speed = 70%
 external_perimeters_first = 0
 extra_perimeters = 1
@@ -23,33 +23,33 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
+extrusion_multiplier = 1.04
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 3
 fill_angle = 45
-fill_density = 0.5
+fill_density = 0.45
 fill_pattern = honeycomb
-first_layer_bed_temperature = 0
+first_layer_bed_temperature = 50
 first_layer_extrusion_width = 200%
-first_layer_height = 0.5
+first_layer_height = 120%
 first_layer_speed = 30%
-first_layer_temperature = 215
+first_layer_temperature = 190
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = teacup
 infill_acceleration = 0
-infill_every_layers = 10
+infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_speed = 60
 layer_gcode = 
-layer_height = 0.3
+layer_height = 0.38
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
@@ -64,23 +64,23 @@ perimeter_extrusion_width = 0
 perimeter_speed = 30
 perimeters = 3
 post_process = 
-print_center = 90,110
+print_center = 75,95
 raft_layers = 0
 randomize_start = 0
 resolution = 0
 retract_before_travel = 2
 retract_layer_change = 1
-retract_length = 5
+retract_length = 0
 retract_length_toolchange = 10
-retract_lift = 1
-retract_restart_extra = 0
+retract_lift = 0
+retract_restart_extra = 1
 retract_restart_extra_toolchange = 0
 retract_speed = 30
 rotate = 0
 scale = 1
 skirt_distance = 6
 skirt_height = 1
-skirts = 1
+skirts = 3
 slowdown_below_layer_time = 30
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
@@ -101,14 +101,14 @@ support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_speed = 60
 support_material_threshold = 0
-temperature = 210
+temperature = 0
 threads = 2
 toolchange_gcode = 
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 50
-top_solid_layers = 4
+top_solid_layers = 3
 travel_speed = 130
 use_relative_e_distances = 0
-vibration_limit = 0
+vibration_limit = 40
 wipe = 0
 z_offset = 0