reprap notes und slic3r config

diff --git a/notes.txt b/notes.txt
new file mode 100644 (file)
index 0000000..41ee8d9
--- /dev/null
+++ b/notes.txt
@@ -0,0 +1,13 @@
+r3 reprap Firmware:
+  https://github.com/btittelbach/Teacup_Firmware
+
+Slic3r Gcode Generator:
+  http://slic3r.org/
+
+PrintRun Frontend
+  https://github.com/kliment/Printrun
+
+
+Problems with Teacup:
+Gcode "M116" aka "Wait until temperature reached" kann ewig hängen.
+Besser die Temperatur manuell einstellen, M116 vom Gcode entfernen und dann drucken.

diff --git a/r3_reprap_slic3r_config.ini b/r3_reprap_slic3r_config.ini
new file mode 100644 (file)
index 0000000..05b78f9
--- /dev/null
+++ b/r3_reprap_slic3r_config.ini
@@ -0,0 +1,114 @@
+# generated by Slic3r 0.9.10b on Tue Jul  9 07:03:03 2013
+avoid_crossing_perimeters = 1
+bed_size = 180,220
+bed_temperature = 0
+bottom_solid_layers = 4
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM2 ; send print end command
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.5
+fill_pattern = honeycomb
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.5
+first_layer_speed = 30%
+first_layer_temperature = 215
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = teacup
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_center = 90,110
+raft_layers = 0
+randomize_start = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 10
+retract_lift = 1
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 210
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 130
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0