X-Git-Url: https://git.realraum.at/?a=blobdiff_plain;f=teacup_firmware%2Fconfig.h;h=bbce7dee295eecf8fd0c68cddf8e2b29457f2935;hb=8eea2dd03e91403559971bdce3f29e6baa338d89;hp=6fbaa3c37cf3273c629864cf77274d3a53ef4940;hpb=49feb10d810bc2f36ba6289146721b4e804efcf9;p=reprap_mendel_prusa.git

diff --git a/teacup_firmware/config.h b/teacup_firmware/config.h
index 6fbaa3c..bbce7de 100644
--- a/teacup_firmware/config.h
+++ b/teacup_firmware/config.h
@@ -64,7 +64,8 @@
 */
 //#define	STEPS_PER_M_X					10047
 //#define	STEPS_PER_M_X					8000
-#define	STEPS_PER_M_X					6766
+//rechnerisch 8000, experimentell auf der X-Achse 7684.8395
+#define	STEPS_PER_M_X				    7685
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define	STEPS_PER_M_Y					10047
 //#define	STEPS_PER_M_Y					8000
@@ -127,7 +128,9 @@
 */
 
 #define	X_MIN			0.0
-#define	X_MAX			184.0
+// eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
+//#define	X_MAX			184.0
+#define	X_MAX			180.0
 
 #define	Y_MIN			0.0
 #define	Y_MAX			220.0
@@ -140,7 +143,7 @@
 
 	This is the startup default and can be changed with M82/M83 while running.
 */
-// #define E_ABSOLUTE
+#define E_ABSOLUTE
 
 
 
@@ -227,8 +230,8 @@
 
 #define	Y_STEP_PIN						DIO23
 #define	Y_DIR_PIN							DIO22
-//~ #define	Y_MIN_PIN							AIO6
-#define	Y_MAX_PIN							AIO5
+#define	Y_MIN_PIN							AIO6
+//~ #define	Y_MAX_PIN							AIO5
 #define	Y_ENABLE_PIN					AIO7
 //#define	Y_INVERT_DIR
 //~ #define	Y_INVERT_MIN
@@ -255,7 +258,7 @@
 #define	SD_WRITE_PROTECT			DIO3
 
 //#define	PS_ON_PIN							DIO14
-#define	PS_ON_PIN							PD4 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
+#define	PS_ON_PIN							PB5 // on TechZoneComm Motherboard, SPI Port: MOSI
 //#define	STEPPER_ENABLE_PIN		xxxx
 //#define	STEPPER_INVERT_ENABLE