X-Git-Url: https://git.realraum.at/?a=blobdiff_plain;f=rf433ctl%2Frf433ctl.pde;h=47673143c322f50ce8aefb730da2b4c27b586fc8;hb=8476c3f31a5e7e8949feb8ae618df8bcb421c991;hp=3501cb343a2b5431c48bb25afb8039958df7b3b0;hpb=8b8bab09ff860da5804edf220740564c28ba9827;p=svn42.git

diff --git a/rf433ctl/rf433ctl.pde b/rf433ctl/rf433ctl.pde
index 3501cb3..4767314 100644
--- a/rf433ctl/rf433ctl.pde
+++ b/rf433ctl/rf433ctl.pde
@@ -141,9 +141,9 @@ void init_word(const word_t w)
   bit_cnt = 0;
 
   if(bit_defs[current_word[bit_cnt]][chunk_cnt].state)
-    digitalWrite(RF_DATA_OUT_PIN, HIGH);
+    digitalWrite(RF_DATA_OUT_PIN, LOW); //neue 12V MosFET Verstärkung invertiert Logik !
   else
-    digitalWrite(RF_DATA_OUT_PIN, LOW);
+    digitalWrite(RF_DATA_OUT_PIN, HIGH);
 
   start_timer();
 }
@@ -157,9 +157,9 @@ ISR(TIMER1_COMPA_vect)
   chunk_cnt++;
   if(bit_defs[current_word[bit_cnt]][chunk_cnt].offset != 0) {
     if(bit_defs[current_word[bit_cnt]][chunk_cnt].state)
-      digitalWrite(RF_DATA_OUT_PIN, HIGH);
+      digitalWrite(RF_DATA_OUT_PIN, LOW); //neue 12V MosFET Verstärkung invertiert Logik !
     else
-      digitalWrite(RF_DATA_OUT_PIN, LOW);
+      digitalWrite(RF_DATA_OUT_PIN, HIGH);
     return;
   }
   
@@ -168,13 +168,13 @@ ISR(TIMER1_COMPA_vect)
     alpha_cnt = 0;
     chunk_cnt = 0;
     if(bit_defs[current_word[bit_cnt]][chunk_cnt].state)
-      digitalWrite(RF_DATA_OUT_PIN, HIGH);
+      digitalWrite(RF_DATA_OUT_PIN, LOW); //neue 12V MosFET Verstärkung invertiert Logik !
     else
-      digitalWrite(RF_DATA_OUT_PIN, LOW);
+      digitalWrite(RF_DATA_OUT_PIN, HIGH);
     return;
   }
   stop_timer();
-  digitalWrite(RF_DATA_OUT_PIN, LOW);
+  digitalWrite(RF_DATA_OUT_PIN, HIGH);
 
   word_cnt++;
   if(word_cnt < FRAME_LEN)
@@ -205,7 +205,7 @@ void printTemperature(DeviceAddress deviceAddress)
 {
   dallas_sensors.requestTemperatures();
   float tempC = dallas_sensors.getTempC(deviceAddress);
-  Serial.print("Temp C: ");
+  //Serial.print("Temp C: ");
   Serial.println(tempC TEMPC_OFFSET_ARDUINO_GENEREATED_HEAT);
   //Serial.print(" Temp F: ");
   //Serial.println(DallasTemperature::toFahrenheit(tempC)); // Converts tempC to Fahrenheit
@@ -236,7 +236,7 @@ void updateLightLevel(unsigned int pin)
 
 void printLightLevel()
 {
-  Serial.print("Photo: ");
+  //Serial.print("Photo: ");
   Serial.println(light_level_mean_);
 }
 
@@ -300,7 +300,7 @@ void flash_led(unsigned int times, unsigned int brightness_divisor, unsigned int
 void setup()
 {
   pinMode(RF_DATA_OUT_PIN, OUTPUT);
-  digitalWrite(RF_DATA_OUT_PIN, LOW);
+  digitalWrite(RF_DATA_OUT_PIN, HIGH);
   pinMode(IR_MOVEMENT_PIN, INPUT);      // set pin to input
   digitalWrite(IR_MOVEMENT_PIN, LOW);  // turn off pullup resistors  
   pinMode(PANIC_BUTTON_PIN, INPUT);      // set pin to input