X-Git-Url: https://git.realraum.at/?a=blobdiff_plain;f=rf433ctl%2FIRremote%2FIRremoteInt.h;fp=rf433ctl%2FIRremote%2FIRremoteInt.h;h=0000000000000000000000000000000000000000;hb=ff9137d257207a3a4b03c4f453cc1b7ce1e3cf17;hp=975d234193d6f3b19e50cf9bf6c4de3908a06f2d;hpb=a34e51d757fe52cb19de2937ae1b211894167524;p=svn42.git

diff --git a/rf433ctl/IRremote/IRremoteInt.h b/rf433ctl/IRremote/IRremoteInt.h
deleted file mode 100644
index 975d234..0000000
--- a/rf433ctl/IRremote/IRremoteInt.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * IRremote
- * Version 0.1 July, 2009
- * Copyright 2009 Ken Shirriff
- * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
- *
- * Interrupt code based on NECIRrcv by Joe Knapp
- * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
- * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
- */
-
-#ifndef IRremoteint_h
-#define IRremoteint_h
-
-#include <Arduino.h>
-
-#define CLKFUDGE 5      // fudge factor for clock interrupt overhead
-#define CLK 256      // max value for clock (timer 2)
-#define PRESCALE 8      // timer2 clock prescale
-#define SYSCLOCK 16000000  // main Arduino clock
-#define CLKSPERUSEC (SYSCLOCK/PRESCALE/1000000)   // timer clocks per microsecond
-
-#define ERR 0
-#define DECODED 1
-
-#define BLINKLED 13
-
-// defines for setting and clearing register bits
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-// clock timer reset value
-#define INIT_TIMER_COUNT2 (CLK - USECPERTICK*CLKSPERUSEC + CLKFUDGE)
-#define RESET_TIMER2 TCNT2 = INIT_TIMER_COUNT2
-
-// pulse parameters in usec
-#define NEC_HDR_MARK	9000
-#define NEC_HDR_SPACE	4500
-#define NEC_BIT_MARK	560
-#define NEC_ONE_SPACE	1600
-#define NEC_ZERO_SPACE	560
-#define NEC_RPT_SPACE	2250
-
-#define SONY_HDR_MARK	2400
-#define SONY_HDR_SPACE	600
-#define SONY_ONE_MARK	1200
-#define SONY_ZERO_MARK	600
-#define SONY_RPT_LENGTH 45000
-
-#define RC5_T1		889
-#define RC5_RPT_LENGTH	46000
-
-#define RC6_HDR_MARK	2666
-#define RC6_HDR_SPACE	889
-#define RC6_T1		444
-#define RC6_RPT_LENGTH	46000
-
-#define TOLERANCE 25  // percent tolerance in measurements
-#define LTOL (1.0 - TOLERANCE/100.) 
-#define UTOL (1.0 + TOLERANCE/100.) 
-
-#define _GAP 5000 // Minimum map between transmissions
-#define GAP_TICKS (_GAP/USECPERTICK)
-
-#define TICKS_LOW(us) (int) (((us)*LTOL/USECPERTICK))
-#define TICKS_HIGH(us) (int) (((us)*UTOL/USECPERTICK + 1))
-
-#ifndef DEBUG
-#define MATCH(measured_ticks, desired_us) ((measured_ticks) >= TICKS_LOW(desired_us) && (measured_ticks) <= TICKS_HIGH(desired_us))
-#define MATCH_MARK(measured_ticks, desired_us) MATCH(measured_ticks, (desired_us) + MARK_EXCESS)
-#define MATCH_SPACE(measured_ticks, desired_us) MATCH((measured_ticks), (desired_us) - MARK_EXCESS)
-// Debugging versions are in IRremote.cpp
-#endif
-
-// receiver states
-#define STATE_IDLE     2
-#define STATE_MARK     3
-#define STATE_SPACE    4
-#define STATE_STOP     5
-
-// information for the interrupt handler
-typedef struct {
-  uint8_t recvpin;           // pin for IR data from detector
-  uint8_t rcvstate;          // state machine
-  uint8_t blinkflag;         // TRUE to enable blinking of pin 13 on IR processing
-  unsigned int timer;     // state timer, counts 50uS ticks.
-  unsigned int rawbuf[RAWBUF]; // raw data
-  uint8_t rawlen;         // counter of entries in rawbuf
-} 
-irparams_t;
-
-// Defined in IRremote.cpp
-extern volatile irparams_t irparams;
-
-// IR detector output is active low
-#define MARK  0
-#define SPACE 1
-
-#define TOPBIT 0x80000000
-
-#define NEC_BITS 32
-#define SONY_BITS 12
-#define MIN_RC5_SAMPLES 11
-#define MIN_RC6_SAMPLES 1
-
-#endif
-