X-Git-Url: https://git.realraum.at/?a=blobdiff_plain;f=reprap_mendel_prusa%2Fteacup_firmware%2Fconfig.h;h=9a32a763cedaac8e5692dd8df035956ca2f3772f;hb=9eb72cb224a7380d4f9070f7cd895a1f147e0fee;hp=6fbaa3c37cf3273c629864cf77274d3a53ef4940;hpb=ffef74661d9cf233a7beb0439ba34a30e0a1a4e5;p=svn42.git

diff --git a/reprap_mendel_prusa/teacup_firmware/config.h b/reprap_mendel_prusa/teacup_firmware/config.h
index 6fbaa3c..9a32a76 100644
--- a/reprap_mendel_prusa/teacup_firmware/config.h
+++ b/reprap_mendel_prusa/teacup_firmware/config.h
@@ -64,7 +64,8 @@
 */
 //#define	STEPS_PER_M_X					10047
 //#define	STEPS_PER_M_X					8000
-#define	STEPS_PER_M_X					6766
+//rechnerisch 8000, experimentell auf der X-Achse 7684.8395
+#define	STEPS_PER_M_X				    7685
 // 200 steps / 20 gearteeth / 2.5mm (abtsand zahnriemen-zähne)
 //#define	STEPS_PER_M_Y					10047
 //#define	STEPS_PER_M_Y					8000
@@ -127,7 +128,9 @@
 */
 
 #define	X_MIN			0.0
-#define	X_MAX			184.0
+// eigentlich 184mm, aber wir lassen uns ein bisschen Sicherheitsabstand
+//#define	X_MAX			184.0
+#define	X_MAX			180.0
 
 #define	Y_MIN			0.0
 #define	Y_MAX			220.0
@@ -255,7 +258,7 @@
 #define	SD_WRITE_PROTECT			DIO3
 
 //#define	PS_ON_PIN							DIO14
-#define	PS_ON_PIN							PD4 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
+#define	PS_ON_PIN							PC5 // on TechZoneComm Motherboard, JTAG Port, TDI Pin
 //#define	STEPPER_ENABLE_PIN		xxxx
 //#define	STEPPER_INVERT_ENABLE